Easychamber Spacer Device
EasyChamber is an anti-static valved holding chamber designed for use with pressurised metered-dose inhalers (pMDIs). It holds the aerosol medication in the chamber after the inhaler is actuated, making it easier to inhale the medicine slowly and effectively.
Key features:
- Anti-static valved holding chamber
- Designed for use with most pressurised metered-dose inhalers (pMDIs)
- Helps reduce the need to coordinate pressing the inhaler with breathing in
- One-way inhalation valve provides low resistance during inhalation
- FlowSignal whistle sounds if you breathe in too quickly
- Transparent chamber allows valve movement to be seen
- Flexible inhaler port compatible with most commonly prescribed pMDIs
- Compact and reusable
- Mouthpiece version
- For single-patient use
- Mask not included
How to use:
Remove the caps from the inhaler and spacer. Shake the inhaler as instructed and insert it firmly into the back of the EasyChamber.
Place your lips securely around the mouthpiece. Press the inhaler once and breathe in slowly and deeply through the spacer. Hold your breath for up to 10 seconds, or for as long as comfortably possible, then breathe out gently away from the spacer.
Alternatively, after pressing the inhaler once, breathe slowly in and out through the spacer for 2–3 breaths.
Administer only one puff into the chamber at a time. If another puff is required, wait 30–60 seconds and shake the inhaler again before repeating. If the whistle sounds, slow down your breathing.
Cleaning instructions:
Clean the spacer at least once a week.
Disassemble the spacer and soak the parts for approximately 15 minutes in lukewarm water with mild liquid detergent. Gently agitate the parts. Do not rinse the chamber after washing. Shake off excess water and leave to air dry completely in a vertical position before reassembling.
Do not boil, sterilise or wash the spacer with hot water. Do not rub dry or rinse directly under running water.
Important information:
For single-patient use only. Always use the spacer according to the instructions supplied with both the EasyChamber and your prescribed inhaler.
Inspect the device before each use and replace it if it is damaged or any components are missing.
The EasyChamber does not contain medication. Continue to use your inhaler exactly as prescribed by your doctor, nurse or pharmacist.
Device type: Anti-static valved holding chamber
Compatibility: Most pressurised metered-dose inhalers (pMDIs)
Version: Mouthpiece
Pack size: 1 spacer device
Always read the instructions before use.
EasyChamber is an anti-static valved holding chamber designed for use with pressurised metered-dose inhalers (pMDIs). It holds the aerosol medication in the chamber after the inhaler is actuated, making it easier to inhale the medicine slowly and effectively.
Key features:
- Anti-static valved holding chamber
- Designed for use with most pressurised metered-dose inhalers (pMDIs)
- Helps reduce the need to coordinate pressing the inhaler with breathing in
- One-way inhalation valve provides low resistance during inhalation
- FlowSignal whistle sounds if you breathe in too quickly
- Transparent chamber allows valve movement to be seen
- Flexible inhaler port compatible with most commonly prescribed pMDIs
- Compact and reusable
- Mouthpiece version
- For single-patient use
- Mask not included
How to use:
Remove the caps from the inhaler and spacer. Shake the inhaler as instructed and insert it firmly into the back of the EasyChamber.
Place your lips securely around the mouthpiece. Press the inhaler once and breathe in slowly and deeply through the spacer. Hold your breath for up to 10 seconds, or for as long as comfortably possible, then breathe out gently away from the spacer.
Alternatively, after pressing the inhaler once, breathe slowly in and out through the spacer for 2–3 breaths.
Administer only one puff into the chamber at a time. If another puff is required, wait 30–60 seconds and shake the inhaler again before repeating. If the whistle sounds, slow down your breathing.
Cleaning instructions:
Clean the spacer at least once a week.
Disassemble the spacer and soak the parts for approximately 15 minutes in lukewarm water with mild liquid detergent. Gently agitate the parts. Do not rinse the chamber after washing. Shake off excess water and leave to air dry completely in a vertical position before reassembling.
Do not boil, sterilise or wash the spacer with hot water. Do not rub dry or rinse directly under running water.
Important information:
For single-patient use only. Always use the spacer according to the instructions supplied with both the EasyChamber and your prescribed inhaler.
Inspect the device before each use and replace it if it is damaged or any components are missing.
The EasyChamber does not contain medication. Continue to use your inhaler exactly as prescribed by your doctor, nurse or pharmacist.
Device type: Anti-static valved holding chamber
Compatibility: Most pressurised metered-dose inhalers (pMDIs)
Version: Mouthpiece
Pack size: 1 spacer device
Always read the instructions before use.